HOME | ABOUT US | CONTACT US

Questions? info@liftpull.com

Lever and Chain Hoists

HOISTS : : TROLLEYS & BEAM CLAMPS : : WINCHES : : CRANES : : SHEAVES : : BELOW THE HOOK : : CONTROLS

BRAKE/HAND WINCH : : ELECTRIC WINCH : : PNEUMATIC WINCH : : HYDRAULIC WINCH : : LINE SPOOLER

HYDRAULIC WINCH

   

 

hydraulic winch

 

Skid Mounted

Self contained skid assembly including two winches, joy stick controls, Perkins turbo-charged diesel engine, Kawasaki pressure compensating pump, hydraulic and fuel tanks

140 HP Perkins turbo diesel engine includes key start and digital display of system elements such as rpm, fuel consumption, oil pressure, etc

Winches include high-efficiency planetary reductions and rapid reverse

Winch speed can be metered in both directions with the optional remote joy stick

All components run in an oil bath with no need for adjustment or external lubrication

Spring-applied, hydraulically-released brake system

220 gallon hydraulic tank maximizes heat displacement and minimizes servicing

50 gallon diesel fuel tank allows for long run times

Skid includes unique fluid containment design captures 125% of the total system fluids while minimizing the opportunity for additional fluids, i.e., rainwater, to mix and hamper recovery

Contact us for more information

 

 

 

 

hydraulic winch

 

Marine-Grade Salvage Winch System

This custom built "marine-grade" salvage winch system is one of Allied Power Products, Inc's (APPI) recent solutions for use pulling "spuds" and broken pilings from a barge.

With pulling capacities of up to 12,000 lbs on each winch drum, these winches can reach line speeds in excess of 72 fpm, when pulling, and 314 fpm in reverse. Each drum offers of up to 360 feet of 1/2" wire rope storage.

A key started, turbo charged 56 HP diesel engine powers this hydraulic system. The winches on this system are driven by a high-efficiency planetary reduction with rapid reverse. Speed can be metered in both directions with a directional control valve. Special features on this unit include a 100 gallon hydraulic reservoir, 12 volt battery pack, throttle control, high temp/low oil shutdowns and a fuel gauge.

3-Drum Hydraulic Line Sagging Package

Allied Power Products, Inc. (APPI) has announced the availability of a three-drum line sagging package for power-line installation.
This new hydraulically powered winch system was engineered by APPI for use on a "D8" size dozer. The system is specifically designed to provide an operator full control, including inching capability, while raising and tensioning high-power transmission lines.

With power provided from the dozer's hydraulic system, each of the three winches in the system has a maximum line pull capacity of 60,000 lbs. Configured to spool up to 275' of 7/8" diameter wire rope and operate by individual controls for pull, speed and free-spooling; this system provides power and precision control with capacity.

A wide range of other hydraulic winch systems with a nearly infinite selection of line pulls, line speeds and wire rope capacities are available. Complete information and application assistance from APPI are available upon request.

Contact us for more information

 

 

 

If we don't carry it, we'll do our best to find it for you, contact us.

 


©2014 Richerson & Associates | All rights reserved | website designed by pelaezcreative.com